60 g fiberglass mesh for crack reinforcement, shipped to Australia

A customer in Australia needed a light mesh to add surface reinforcement against cracks. We supplied 60 g/m² white fiberglass mesh in 1 × 50 m rolls.

What the customer needed

The customer used the mesh as an extra reinforcing layer in a surface finish, to stop cracks from forming. For this kind of work a light, fine mesh is embedded in the base coat, so the 60 g/m² weight and the small 3 × 3 mm opening were chosen.

What we supplied

White leno-weave fiberglass mesh, 60 g/m², 3 × 3 mm, on rolls 1 m wide and 50 m long. Leno weave locks the crossing yarns so the openings keep their shape when the mesh is cut and pressed into plaster.

Result

The customer reported that the bulk mesh matched the approved samples and that delivery arrived on schedule, which kept their project on its timetable. They told us they expected to reorder.